• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Place of Origin: Guangdong, China (Mainland)
  • Brand Name: lintratek
  • Model Number: KW23F-DL repeater/amplifier
  • gain: 70db repeater/amplifier
  • output power: 23dbm
  • product size: 270*170*60(mm)
  • net weight: < 3.5Kg
  • frequancy: DCS+LTE:UL:1710~1785/2500~2570 MHz;DL:1805~1880/2620~2690 MHz
  • coverage: 800-2000sqm
  • connector: N-Female connector
  • certificate: CE,ROHS
  • quality warranty: 12 months

Packaging & Delivery

Packaging Details Standard neutral packing
Delivery Time 2-5days

mobile signal receiver, dcs lte repeater, 2/4g cell phone signal receiver/repeater/booster


  Why do you need to buy repeater/booster?




Cell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save somebody's life.


Unfortunately, there are still some places where they can find themselves "out of coverage" ,no signal at all... Usually those places are either too far from the cell phone base station or located inside underground constructions, for example:


  • Parking lots, tunnels
  • Big stores, office buildings
  • Cars, boats etc.
  • House in remote areas

How can repeater bring your mobile phone better signal?



•The outside antenna catches low signal from operator servicer's base station and delivers it to cell phone repeater through the connection cable (coax).

•After the signal is accepted by the mobile repeater, this device amplifies it.

•Then this amplified signal goes through the connection cable (coax) to the inside antenna.

And after that, the amplified signal transmits to your cell phone.

• Finally, your cell phone will get good signal, never on and off


A regular cell phone repeater consists of: (full kit)

  • 1 -Outdoor antenna log periodic antenna(or wall mounted, yagi antenna)
  • 2 - Indoor Omni ceiling antenna( panel antenna)
  • 3 – Power adapter
  • 5 - User manual
  • 6 - Cell phone repeater
  • 7- 10 meters outdoor cable and 1 meter indoor cable










Specification should care about :


    Model No  KW23F-DL
Parameter data Uplink Downlink
Frequency RangeDCS+LTE1710~1785/2500~2570 MHz1805~1880/2620~2690 MHz
Output Power  20 ±2dBm23 ±2dBm
Gain 65±2 dB70±2dB
Bandwidth Wide Band 
Automatic Gain Control >20dB 
Manual Gain Control 31dB in step of 1dB
Ripple in Band ≤4dB
Intermodulation Products9KHz~1GHz≤ -36 dBm 
1GHz~12.75GHz≤ -30 dBm 
Spurious Emission9KHz~1GHz≤ -36 dBm 
1GHz~12.75GHz≤ -30 dBm 
Noise Figure @ max. gain ≤ 6 dB
MTBF>50000 hours
Power SupplyAC:90~265V, 50/ 60Hz;DC:9V 5A
Power Comsumption< 20W
Impedance 50 ohm
Mechanical Specification  
 RF Connector N-Female 
 Cooling  Heatsink Convection cooling 
Dimensions (D x W xH ) 270*170*60(mm)
Weight ≤ 3.5Kg
Installation Type Wall Installation 
Environment Conditions  IP40
Humidity <  90%
Operating Temperature -10℃ ~ 55℃ 

Our Services
How should you install repeater (very easy and simple):

Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar).


Step 2 Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal.


Step3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater.


Step 4: Mount your indoor antenna with signal repeater


Step5:  Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.


Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least.

Indoor and outdoor antenna must be separated by wall.






Company Information




After- Sales Service


We have 12 months quality guarantee for all customers, you can return goods to us when receive defective repeater, but air freight charges should be responsible by buyer.



Signal problem & installation technique supporting

1.If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM.


2.If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well.


3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line.


4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover area.



Return to website home page  

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview


Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
Trade Assurance
China (Mainland)
Transaction Level:
Supplier Assessments:
29 Transactions 10,000+
The supplier’s transactions conducted via Alibaba.com in the past 6 months.
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $37,000
Learn More